Precisie Laser Graveren & Snijden
Laser Graveren & Snijden
Gedetailleerd graveren en licht snijden op natuurlijke materialen. Snel een offerte, kleine oplages mogelijk.
Binnen 24u offerte
Werkgebied 310 × 260 mm
445 nm blauwe diode – veilig en precies
Strakke resultaten op hout, leer, papier en meer
We gebruiken een blauwe‑diode laser voor scherp graveren en licht snijden. Ideaal voor labels, cadeaus, signage, prototypes en personalisatie.
Werkgebied: 310 × 260 mm
| Materiaal | Max dikte/afmeting | Notities |
|---|---|---|
| ✅ Easy to cut (within one or two passes, clean results) | ||
| Wood (basswood / plywood) | up to 5 mm | Officially specified by Bambu; clean results. |
| Cork | ~ 3–4 mm | Soft and porous; cuts very well. |
| Paper / cardboard / thin leather / vinyl | < 1 mm | Trivial for the laser; blade module is often better for precision. |
| ⚠️ Cuttable, but with limitations (slower / multiple passes / charring) | ||
| Acrylic (coloured / opaque) | ~ 4–5 mm | Clear acrylic is very difficult; dark/opaque works better. |
| PU / natural leather / leatherette | ~ 3–4 mm | Possible, but edge darkening/burning is common. |
| MDF / particle board | ~ 3–5 mm | Doable; expect more smoke and charred edges. |
| Rubber (soft / natural) | ~ 3–4 mm | Varies by formulation; strong odor/smoke, sometimes not recommended. |
| Thin plastics / polymers | ~ 2–3 mm | Depends on plastic type; some melt or release toxic fumes. |
| Good for Engraving Only (not practical for cutting) | ||
| Metals | N/A | Can’t cut; engrave anodized aluminum, stainless (with marking spray), and coated metals. |
| Rubber (dense / vulcanized) | N/A | Engraving works well (stamps, texturing); cutting is messy, smoky, and inconsistent. |
| Thick leather (> 3 mm) | N/A | Engraves nicely; cutting is slow and burns edges. |
| Some plastics (ABS, polycarbonate, PVC ⚠️) | N/A | Engraving possible; avoid PVC (toxic fumes). Cutting melts/warps. |
| MDF / particle board (thicker than 5 mm) | N/A | Engraving okay; thick cutting causes extreme charring. |
| ⚠️ Better for Engraving than Cutting (thin sheets possible, but engraving is safer/cleaner) | ||
| Acrylic (especially clear) | — | Diode laser engraves frosted look; cutting clear acrylic is very difficult due to light transmission. |
| Leatherette / PU | — | Engraves clean logos/designs; cutting melts edges. |
| ✅ Both Cutting & Engraving Work Well | ||
| Wood (basswood / plywood) | up to 5 mm | Engraves beautifully and cuts cleanly. |
| Cork | ≤ 4 mm | Engraves crisp designs and cuts easily. |
| Paper / cardboard | — | Excellent for both engraving and cutting. |
Quick Rule of Thumb:
- Engrave metals & dense/reflective/heat-sensitive materials.
- Cut woods, cork, and dark acrylics.
- Be cautious with plastics and rubbers (fumes & melting).
Offerte voor laserwerk aanvragen
Offerteaanvraag
Vul hieronder het formulier in voor uw persoonlijke offerte